Product Description
Compounding sponge
Pattern:
Standard
Density: Firm
Colour: Blue
Diameter: Ø125mm
Thread/hook and loop: hook and loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR | POLISH | COMPOUND |
| White | Good | Best |
| Orange | Good | Best |
| Red | Best | |
| Black | Best |
Compounding sponge range:
| ORDER NO. | DENSITY | COLOUR | DIAMETER | THREAD | PATTERN |
| SPC00101 | Firm | Orange | ø200mm | hook and loop | Standard |
| SPC00100 | Soft | Yellow | ø200mm | hook and loop | Standard |
| SPC00102 | Soft | Red | ø200mm | hook and loop | Standard |
| TCCS15058 | Firm | White | ø150mm | 5/8 UNC | Standard |
| TCCS15014-1 | Firm | White | ø150mm | M14 | Standard |
| TCCS15014-4 | Firm | White | ø150mm | M14 | Standard |
| TCCS15014 | Firm | Orange | ø150mm | M14 | Standard |
| TCC15014-2 | Soft | Red | ø150mm | M14 | Standard |
| TCCS15014-3 | Soft | Black | ø150mm | M14 | Standard |
| TCCS15014-5 | Soft | Black | ø150mm | M14 | Waffle |
| SPC00124 | Firm | Blue | ø125mm | hook and loop | Standard |
NOTE:
For the ø200mm hook and loop compounding sponges, use the M14 backing pad
SPC00106.
Adaptors to convert or lenghten the polisher's thread:
| ORDER NO./td> | MALE THREAD | FEMALE THREAD |
| SPC00055 | 5/8 UNC | 5/8 UNC |
| SPC00053 | 5/8 UNC | M14 |
| SPC00054 | M14 | 5/8 UNC |
| SPC00052 | M14 | M14 |
Recommended polishing compounds to use:
- Liquid Shine™ High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
- Liquid Shine™ Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
- Liquid Shine™ Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step
